IkaLogic Scanalogic-2 Pro (Logikanalysator)

Aus Wiki
Wechseln zu: Navigation, Suche

Inhaltsverzeichnis

Allgemein

Dieselbe Hardware gibt es als "Edu-Kit" und als "Pro":

Hardware

Debugger port (JP3)

  • 1: PB3 (MOSI)
  • 2: PB4 (MISO)
  • 3: PB5 (SCK)
  • 4: PC6 (RESET)

Support for:

  • Memory Programming: Serial Downloading, see datasheet chapter 32.8., p.337
  • possibly also debugWire, see datasheet chapter 29., p.334

Schematik

ikalogic-scanalogic2-schematic.png

Bill of materials

ikalogic-scanalogic2-components.png

The Edu Kit's component placement plan

ikalogic-scanalogic2-edu-component-placement.png

Firmware

The firmware is Open Source under the terms and conditions of the GNU GPLv3 and available from here:

Linux

dmesg

usb 1-1.1.2.2: new low-speed USB device number 45 using ehci-pci
usb 1-1.1.2.2: New USB device found, idVendor=20a0, idProduct=4123
usb 1-1.1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.2.2: Product: SCANALOGIC
usb 1-1.1.2.2: Manufacturer: ikalogic
hid-generic 0003:20A0:4123.0101: hiddev0,hidraw3: USB HID v1.01 Device [ikalogic SCANALOGIC] on usb-0000:00:1a.0-1.1.2.2/input0

lsusb

Bus 001 Device 045: ID 20a0:4123 Clay Logic IKALOGIC SCANALOGIC 2
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x20a0 Clay Logic
  idProduct          0x4123 IKALOGIC SCANALOGIC 2
  bcdDevice            1.00
  iManufacturer           1 ikalogic
  iProduct                2 SCANALOGIC
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      0 None
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.01
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      22
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval             100
Device Status:     0x0000
  (Bus Powered)

Links

Meine Werkzeuge
Namensräume
Varianten
Aktionen
Navigation
Werkzeuge