National Instruments GPIB-USB-HS (GPIB-USB-Adapter)

Aus Wiki
Wechseln zu: Navigation, Suche

Inhaltsverzeichnis

Herstellerinformationen

Linux

dmesg

usb 1-1.1.3: new high-speed USB device number 19 using ehci-pci
usb 1-1.1.3: New USB device found, idVendor=3923, idProduct=709b
usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1.3: Product: GPIB-USB-HS
usb 1-1.1.3: Manufacturer: National Instruments
usb 1-1.1.3: SerialNumber: 01299815

lsusb

Bus 001 Device 019: ID 3923:709b National Instruments Corp. GPIB-USB-HS
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x3923 National Instruments Corp.
  idProduct          0x709b GPIB-USB-HS
  bcdDevice            1.01
  iManufacturer           1 National Instruments
  iProduct                2 GPIB-USB-HS
  iSerial                 3 01299815
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           53
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           5
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x06  EP 6 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               2
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               2
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               2
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               2
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval               4
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Kernel sources

No driver found in v4.7.

Linux-GPIB

According to the documentation, there is support for this adapter using the kernel driver module ni_usb_gpib.ko and the board_type 'ni_usb_b' in /etc/gpib.conf

Furthermore it states:

Unlike the USB-B, the USB-HS and USB-HS+ do not require a firmware upload to become functional
after being plugged in. The linux-gpib tarball contains hotplug scripts which will automatically run
gpib_config after the device is plugged in.
Meine Werkzeuge
Namensräume
Varianten
Aktionen
Navigation
Werkzeuge