HP Jetdirect J7942 (Print-Server)

Aus Wiki
Version vom 7. Februar 2015, 00:09 Uhr von Matthias (Diskussion | Beiträge)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Wechseln zu: Navigation, Suche
  • Platine:
hp invent
5092-0157
22JAN04
Rev B
  • Philips ISP1561BM
  • SoC: Philips ARM VT22499
CD0350
TS0436-Y
  • 4MB Flash: AMD AM29LV320D8
  • LAN: Broadcom BCM5220A4KPT
  • RAM: Infineon HYB39S128160CT-7
  • ST LS970D
  • P500: 3.3V RS232 port, 38400 8N1

Bootlog

STNM
00000018
00001018
000000F1                                                                     
000010F1                                                                     
000010F0                                                                     
000000F4                                                                     
Partition jump 000040F0 00000000 00000000 40004000                           
00000010                                                                     
00001010                                                                     
00000011                                                                     
00001011                                                                     
00000014                                                                     
00001014                                                                     
00000018                                
00001018                                
0000001C                                
0000101C                                
0000001D                                
00000043
Partition jump 000100F0 00000001 00000000 40010000
lmRegister(0x2000, 'VxwDriver', 0x0, 0x0) was called before LM was alive by pid 0x80fed814 'jdstrt'
dmValidatStringFunc: length is Okay: 0x0
setSuDLCStateProto: entry &suDLCStateProto(0x8033da48) pVal(0x80fed774)
setSuDLCStateProto: exit
Target Name: vxTarget 
pDevTbl->processed = 0, count=0
processing count=0
0x80fed814 (jdstrt): phyConfig: PHY ID is 0x1018 
Attached TCP/IP interface to hpmac unit 0
done.
Performance test tools loaded
USB performance test tools loaded
 ... but the USB driver is not
0x80fdf2fc (tbgPoller): phyConfig: PHY ID is 0x1018 
0x80fdf2fc (tbgPoller): phyConfig: PHY ID is 0x1018 
0x80fdf2fc (tbgPoller): phyConfig: PHY ID is 0x1018 
Starting DHCP 
0x80fdf2fc (tbgPoller): verifyTLink: Loss of carrier
0x80fdf2fc (tbgPoller): phyConfig: PHY ID is 0x1018 
Meine Werkzeuge
Namensräume
Varianten
Aktionen
Navigation
Werkzeuge